Advanced Manufacturing Technologies in Biomedical Science - Practical Applications, Case Studies, and Future Trends

Advanced Manufacturing Technologies in Biomedical Science: Practical Applications, Case Studies, and Future Trends provides a comprehensive overview of the latest advancements in biomedical advanced manufacturing.

List of contents

1. Introduction of Advanced Manufacturing Technologies in Biomedical Science. 2. Nanotechnology in Biomedical Manufacturing. 3. Development of Biodegradable Materials and Advanced Coating Technologies for Biomedical Devices. 4. Additive Manufacturing in Tissue Engineering. 5. Robotics and Automation in Biomedical Manufacturing. 6. Smart Materials and Their Applications in Biomedical Science. 7. Bioprinting and Tissue Engineering. 8. Quality Control and Regulatory Compliance in Biomedical Manufacturing. 9. Social and Economic Aspects of the Advance Manufacturing Processes in Biomedical Sciences. 10. Future Trends and Challenges in Biomedical Manufacturing. 11. Case Study: Fabrication of Bioimplants using Additive Manufacturing. 12. Case Study: Experimental and Computational Aspects of Prosthetics.

About the author

Dr. Jashanpreet Singh is currently working as Assistant Professor in 'University Center for Research and Development' at Chandigarh University, Mohali, India. He had obtained his PhD degree in the field of Slurry Erosion and Thermal Spray Coatings from Thapar Institute of Engineering and Technology, Patiala in 2019. He has a teaching experience of more than three years and industry experience of more than two years. His area of research is tribology-solid particle erosion, power plant engineering, ash conveying, thermal spray coatings, CFD simulation, composites, and materials characterization. He has contributed comprehensively in thermal spray coatings and tribology in reputed journals including Wear, Tribology International, Ceramics International, Applied Surface Science Advances, Particulate Science and Technology, Engineering Failure Analysis, ASME: Journal of Tribology, ASCE Journal of Pipeline Systems - Engineering and Practice, Coatings, Proceedings of IMeche Part J: Journal of Engineering Tribology, Part E: Journal of Process Mechanical Engineering, Surface Review and Letters, Materials Science & Engineering B, Industrial Lubrication and Tribology, under the flagship of various publishers like Elsevier, Taylor & Francis, Sage, Springer nature, World Scientific, Emrald Publishing, etc. He has authored 80+ research publications in which 46 publications are indexed in SCIE/ESCI (Web of Science) and 70 are indexed in SCOPUS database in various International Journals, Books and Conferences of repute. He has authored 01 book with CRC Press and book chapters in 06 different CRC Press' books. He is serving as a reviewer for various journals such as Ceramics International, Surface Coatings and Technology, Tribology in Industry, Surface Topography: Metrology and Properties, Vacuum, IMeche Part E: Journal of Process Mechanical Engineering, Material Research Express, Surface Review and Letters, International Journal of Interactive Design and Manufacturing, Industrial Lubrication and Tribology, Materials Today: Proceedings, etc. He is currently an Editor of Elsevier Book. He is serving as Guest Editor for International Journal of Interactive Design and Manufacturing (Springer Nature), Recent Patents on Mechanical Engineering (Springer Nature), Recent Advances in Computer Science and Communications (Bentham Science), & Recent Patents of Engineering (Bentham Science). He is also a Section Editor (Special Issues) in Recent Advances in Computer Science and Communications (Bentham Science) for Section "Advanced Applications of Artificial Intelligence in Manufacturing Technologies". He is listed in World's Top 2% List of Scientists by Stanford University (USA) from 2022 to 2024. He had received "Trusted Reviewer Status" from Institute of Physics (IOP) in 2020. He has been awarded as an "Outstanding Reviewer Award 2021" by Institute of Physics (IOP) for Journal: Surface Topography: Metrology and Properties. He is a life member of AICTSD, IAENG, and NITTSD.
Dr. Hitesh Vasudev is also H.O.D. of Division of Research and Division at Lovely Professional University, Phagwara, Punjab, India. Dr. Vasudev is working as a Professor in the School of Mechanical Engineering at Lovely Professional University. He has received his Ph.D. degree from Guru Nanak Dev Engineering College, Ludhiana-India in 2018 under the guidance of Prof. (Dr.) Harmeet Singh, GNDEC, Ludhiana and Dr. Lalit Thakur, NIT, Kurukshetra. His research areas include Surface Engineering/Thermal Spraying (HVOF, Flame Spray, Cold and Plasma Spray, and Microwave Claddings). Currently working on the development of Nano- structured, Multi-modal, and High entropy alloys coatings for high temperature oxidation and corrosion resistance -Thermal Barrier Coatings (TBCs) and Microwave processing of materials. Recently, he has listed in World top 2% Scientists published by Stanford University and Elsevier-2023 & 2024. He has contributed extensively in thermal spray coatings in repute journals which include Surface coatings and Technology, Materials Today Communications, Engineering Failure Analysis, Journal of Cleaner Production, Surface Topography: Metrology and Properties and Journal of failure prevention and control, International Journal of Surface Engineering and Interdisciplinary Materials Science under the flagship of various publication groups such as Elsevier, Taylor & Francis, Springer nature, IGI Global and In-Tech Open. Moreover, he is a dedicated reviewer of reputed journals such as Surface Coatings and Technology, Journal of Thermal Spray and Technology, Ceramics International, Journal of Material Engineering Performance, Engineering Failure Analysis, Surface Topography: Metrology and Properties Material Research Express, Engineering Research Express and IGI Global journals etc. He has been awarded a "Top Cited Paper Awards India 2022" by @IOP Publishing, United Kingdom in Review Category. He has won Research Excellence Award-2019, 2020, 2021 and 2023 in Lovely Professional University. He has 50+ SCI indexed paper, 100 Scopus Indexed papers, 15 conference papers, 5 books (1 Self-authored and 4 Edited Books) and 25 book chapters. He has granted patent titled "High-Temperature Oxidation and Erosion Resistant Alloy-718/Al2O3 Composite Coatings". He has organized a National Conference and International Conferences. He has received a SEED MONEY for project tilted "Fabrication of coatings for bio-medical applications", Project Number: LPU/DRD/SEED/SAC/140222/24804 from Lovely Professional University, India. He has also received a grant from Scientific Engineering and Research Board (SERB), New Delhi, Government of India to conduct a conference in 2023.
Dr. Prakash is Pro-Vice Chancellor, Research & Development, 'University Center for Research and Development' at Chandigarh University, Mohali, India and serving Professor at Department of Mechanical Engineering. He served as Dean Research & Development at SVKM's Narsee Monjee Institute of Management Studies, Deemed-to-be-University, Mumbai, India and Lovely Professional University, India. He is a Ph.D. alumnus of Panjab University, Chandigarh. He is also an Adjunct Professor (Honorary position) at the Institute for Computational Science, Ton Duc Thang University, Vietnam. He is a dedicated teacher who embraces student-centric approaches, providing experiential learning to his students. He is a passionate researcher with diversified research interests- developing materials for Biomedical and Healthcare applications, additive manufacturing, and developing and exploring new cost-effective manufacturing technologies for biomedical industries. He has published over 397 (326 SCI/Scopus) scientific articles in peer-reviewed, reputable, top-notch journals, conferences, and books. Dr. Prakash is a highly cited researcher at the international level, and he has 8010 citations, an H-index of 50, and an i-10 index of 173. He is among India's Top 1% of leading Mechanical and Aerospace Engineering scientists, Research.com. He holds 38 ranks in India and 1590th rank in the world. He also consistently appeared in the top 2% of researchers as per Stanford Study in 2021, 2022, and 2023. Dr. Prakash edited/authored 25 books, serving as a Series editor of 2 books and as Guest Editor of several peer-reviewed journals. He is an Editorial board member of Journal of Magnesium and Alloys (Elsevier, IF-17.6, SJR 2.4, Q1), Nanofabrication (IF-2.9, Q2); International Journal on Interactive Design and Manufacturing, IJIDeM (Springer, IF-2.1); Cogent Engineering (Taylor & Francis, WOS, IF: 1.9), High-Temperature Materials and Processes (De-Gruyter, IF: 1.5), Journal of Electrochemical Science and Engineering (WOS, IF: 2.1), Materials Circular Economy: Science, Engineering, and Sustainability (Springer). He is working on Research commercialisation and has published 18 patents. His 4 patents were granted. Dr. Prakash raised over 1.2 million USD in grants from various national and international bodies, including the Ministry of Science & Technology India, UKIERI-DST and SERB Government of India. Dr. Prakash organized various international conferences and faculty development programs. He was acknowledged with the Research Excellence Award for the best and most highly productive researcher in 2019, 2020, and 2021 by Lovely Professional University, Phagwara, Punjab.
Dr. Manpreet Singh is presently working as a Computational Research Scientist at the Henry M. Jackson Foundation for the Advancement of Military Medicine, Inc. (HJF), Bethesda, Maryland, United States in support of Department of Defense Biotechnology High Performance Computing Software Applications Institute (DOD-BHSAI), Telemedicine and Advanced Technology Research Center (TATRC), United States Army Medical Research and Development Command (USAMRDC), Fort Detrick, MD, USA. Dr. Singh received his Ph.D. in Mechanical Engineering (Thermo-fluids Sciences Specialization) at University of Maryland Baltimore County, Baltimore, MD, USA. During his Ph.D., Dr. Singh worked on an National Science Foundation (NSF-1705538) funded project title "Mild Hyperthermia to enhance delivery of therapeutic nanocarriers in tumors: imaging, in vivo study, and simulation". He is one of the few leading interdisciplinary experts in the fields of thermal engineering and mathematics who is well-known for developing mathematical models of biological systems and medical devices to identify novel diagnostic and treatment strategies to improve the care available for chronic diseases such as cancer, type-1 diabetes, and cold-related injuries such as frostbite and loss of dexterity, hypothermia etc. Most importantly, Dr. Singh's work in developing novel medical devices is exemplary as his multi-orifice insulin delivery device that he developed is currently undergoing human clinical trials in the United States and Europe to obtain Food and Drug Administration 510K approval and CE Mark approval. Therefore, his multi-hole cannula design is a proof of technology being commercialized for insulin delivery demonstrates the impact of Dr. Singh's work. Moreover, his open-source algorithm for magnetic coil design has been consistently adopted by other researchers to inform their own work. In addition, he has actively engaged his peers in the field of thermal engineering by authoring and co-authoring 35 peer-reviewed scientific publications including 8 peer-reviewed journal articles, 2 peer-reviewed conference proceedings articles, 3 book chapters, 22 peer-reviewed conference abstracts that have been published in leading international research journals such as International Journal of Heat and Mass Transfer, International Communications in Heat and Mass Transfer, ASME J. Heat Transfer, Computers in Biology and Medicine, and International Journal of Thermal Sciences. More recently, he has received early career recognition with the "AMMCS-2023 Kolmogorov-Wiener Young Researcher Award" at the VIth International Conference on Applied Mathematics, Modeling and Computational Science held at Wilfrid Laurier University, Waterloo, Ontario, Canada from August 14-18, 2023, for improving the prominent mathematical model (Pennes Bioheat Transfer Equation 1948) to predict temperature distribution in cancerous tissues. Briefly, Dr. Singh incorporated heterogeneous blood perfusion term obtained using medical imaging at each pixel location to relax the uniform blood perfusion assumption. Additionally, Dr. Singh is a recipient of three more research awards during his doctoral degree program at the University of Maryland Baltimore County, Baltimore, Maryland, USA, including the "Dissertation Fellowship Award," "Student Researcher of the Quarter Award," "Graduate Student of the Month Award," and three times "GSA Professional Development Grantee." Such awards hold higher recognition as these awards were received from a "R1" doctoral university, classified as Research Extensive or Very High Research Activity (VHRA) university under Carnegie Classification of Institutions of higher Recognition in the United States. Furthermore, Dr. Singh's appointment as an Academic Editor for PLOS One, Guest Associate Editor for Frontiers in Thermal Engineering, Co-Guest Editor for Bioengineering and moreover, unsolicited invitations to review Book Proposals as a Subject Matter Expert for Taylor and Francis Group, Judge for Senior Capstone Projects and International Conferences such as 10th American Society of Thermal and Fluids Engineering Conference, Topic Coordinator for Specialized research topics, and review invitations for international journals such as Case Studies in Thermal Engineering, Thermal Science and Engineering Progress, Heat and Mass Transfer, Frontiers in Oncology and many more Topical Advisor Panel Member position for journals testifies to his high stature in the field of Computational Heat and Mass Transfer and Mathematics.

Product details

• Authors: Jashanpreet (Chandigarh University Singh
• Assisted by: Chander Prakash (Editor), Jashanpreet Singh (Editor), Singh Manpreet (Editor), Hitesh Vasudev (Editor)
• Publisher: Taylor & Francis Ltd.
• Languages: English
• Product format: Hardback
• Release: 10.09.2025
• EAN: 9781032849164
• ISBN: 978-1-0-3284916-4
• No. of pages: 544
• Series: Sustainable Manufacturing Technologies
• Subjects: Humanities, art, music > Art > Interior design, design; Product Design, TECHNOLOGY & ENGINEERING / Manufacturing, TECHNOLOGY & ENGINEERING / Biomedical, Materials science, Production engineering, Engineering: general, Biomedical engineering, Production & quality control management, Manufacturing industries, Regulation of medicines and medical devices, Regulation Of Medicines & Medical Devices, Pharmaceutical industries, TECHNOLOGY & ENGINEERING / Materials Science / General, Hydraulic Engineering, Production and quality control management, Production and industrial engineering, Ergonomics