Proceedings of the 42nd International Conference on Advanced - Ceramics and Composites, Volume 39, Issue

Proceeding of the 42nd International Conference on Advanced Ceramics and Composites, Ceramic Engineering and Science Proceedings Volume 39, Issue 2, 2018
Jonathan Salem, Dietmar Koch, Peter Mechnich, Mihails Kusnezoff, Narottam Bansal, Jerry LaSalvia, Palani Balaya, Zhengyi Fu, and Tatsuki Ohji, Editors
Valerie Wiesner and Manabu Fukushima, Volume Editors
This proceedings contains a collection of 25 papers from The American Ceramic Society's 41st International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 21-26, 2018. This issue includes papers presented in the following symposia:
- Symposium 1: Mechanical Behavior and Performance of Ceramics and Composites
- Symposium 2: Advanced Ceramic Coatings for Structural, Environmental, and Functional Applications
- Symposium 3: 15th International Symposium on Solid Oxide Fuel Cells (SOFC)
- Symposium 4: Armor Ceramics: Challenges and New Developments
- Symposium 6: Advanced Materials and Technologies for Direct Thermal Energy Conversion and Rechargeable Energy Storage
- Symposium 8: 12th International Symposium on Advanced Processing & Manufacturing

List of contents

Introduction ix
MECHANICAL BEHAVIOR AND PERFORMANCE OF CERAMICS AND COMPOSITES
Fracture Toughness of Modern and Ancient Glasses and Glass Ceramics as Measured by the SEPB Method 3
G. D. Quinn, J. J. Swab, and P. Patel
Erosion Behavior in a Gas Turbine Grade Oxide/Oxide Ceramic Matrix Composite 15
M. J. Presby, N. Kedir, L. J. Sanchez, C. Gong, D. C. Faucett, S. R. Choi,and G. N. Morscher
Applying ASTM International C1421 to Glasses and Optical Ceramics 27
Jonathan A. Salem and Michael G. Jenkins
Effect of Control Mode and Test Rate on the Measured Fracture Toughness of Advanced Ceramics 41
Bronson D. Hausmann and Jonathan A. Salem
In-Situ Study on SiC-Si Interfacial Bonding Strength of Reaction Bonded SiC/Si Composites 51
C. Hsu, Y. Zhang, P. Karandikar, F. Deng, and C. Ni
Evaluation of New Technique to Estimate Yield Stress in Brittle Materials via Spherical Indentation Testing 61
B. L. Hackett, A. A. Wereszczak, and G. M. Pharr
ADVANCED CERAMIC COATINGS FOR STRUCTURAL,ENVIRONMENTAL, AND FUNCTIONAL APPLICATIONS
Oxidation Study of an Ultra High Temperature Ceramic Coating Based on HFSiCN 75
Dagny Sacksteder, Deborah L. Waters, and Dongming Zhu
15TH INTERNATIONAL SYMPOSIUM ON SOLID OXIDE FUEL CELLS (SOFC): MATERIALS, SCIENCE, AND TECHNOLOGY
Investigation of (La_1-X,Ca_X)(Ni_0.25Fe_0.25Cr_0.25Co_0.25)O₃ for Solid Oxide Fuel Cells Cathode Materials 87
Sai Ram Gajjala, Zhezhen Fu, and Rasit Koc
Development of Cathode Contacting for SOFC Stacks 99
K. Sick, N. Grigorev, N.H. Menzler, and O. Guillon
Microstruct ure Modification in the Electrodes to Enhance Performance of the Anode-Supported Solid Oxide Fuel Cell 113
Chun-Yen Yeh, Tai-Nan Lin, Hong-Yi Kuo, Ming-Wei Liao, Yu-Ming Chen,Wei-Xin Kao, Ruey-Yi Lee, and Sheng-Wei Lee
Preparation and Characterization of BaY0.2Ce0.7Zr0.1O3-¿ Ceramic Powder by Glycine Nitrate Combustion (GNC) Process for Proton-conducting Solid Oxide Fuel Cell 123
Wei-Xin Kao, Tai-Nan Lin, Ming-Wei Liao, Hong-Yi Kuo, Chun-Yen Yeh, Yu-Ming Chen, and Ruey-yi Lee
Effects of Composite Ratio of Vermiculite/Talc Seal Material on Gas Leak Properties 131
Jie Xu and Seiichi Suda
Performance Test for Anode-Supported and Metal-Supported Solid Oxide Electrolysis Cell under Different Current Densities 139
Szu-Han Wu, Jing-Kai Lin, Wei-Hong Shiu, Chien-Kuo Liu, Tai-Nan Lin, Ruey-Yi Lee, Huan-Chan Ting, Hung-Hsiang Lin, and Yung-Neng Cheng
Protective Coatings for SOFC Metallic Interconnects 149
Mark K. King Jr. and Manoj K. Mahapatra
Development of Portable Solid Oxide Fuel Cell System Driven by Hydrocarbon and Alcohol Fuels 159
Hirofumi Sumi, Hiroyuki Shimada, Toshiaki Yamaguchi, Yoshinobu Fujishiro and Masanobu Awano
Phase Field Modelling of Microstructural Changes in Ni/YSZ Solid Oxide Electrolysis Cell Electrodes 165
M. Trini, S. De Angelis, P. S. Jørgensen, A. Hauch, M. Chen and P. V. Hendriksen
Development of Fe/Cr Alloy-Supported Solid Oxide Fuel Cell by Plasma Technique 177
Sheng-Fu Yang , Chun-Huang Tsai, Chun-Liang Chang, Cheng-Yun Fu,Ruey-Yi Lee, Chien-Kuo Liu, and Huei-Long Lee
ARMOR CERAMICS: CHALLENGES AND NEW DEVELOPMENTS
Effects of Hardness and Toughness of Ceramic in a Ceramic Armour Module against Long Rod Impacts 187
W. L. Goh, B. Luo, Z. Zeng, J. Yuan, and K. W. Ng
Mesoscale Simulations of Boron Carbide Subjected to Shockwave Propagation 199
Brady Aydelotte, Jennifer Sietins, Clara Mock, Carli Moorehead and Timothy Holmquist
First Principles Model of Yttrium Adsorption on Boron Suboxide (0001) Surface 205
J. Synowczynski-Dunn, K. Behler, J. C. LaSalvia, C. Marvel, and M. Harmer
Generation of Polycrystalline Microstructures for the Discretization On-The-Fly of FE Models for Multi-Scale Simulations 213
S. Falco, N. Bombace, and N. Petrinic
ADVANCED MATERIALS AND TECHNOLOGIES FOR DIRECT THERMAL ENERGY CONVERSION AND RECHARGEABLE ENERGY STORAGE
The Tape-Casting and PAS Sintering of LLZO Ceramic Membrane Electrolyte 223
Fei Chen, Shiyu Cao, Xing Xiang, Dunjie Yang, Wenping Zha, Junyang Li, Qiang Shen, and Lianmeng Zhang
12TH INTERNATIONAL SYMBOSIUM ON ADVANCED PROCESSING & MANUFACTURING TECHNOLOGIES FOR STRUCTURAL MULTIFUNCTIONAL TECHNOLOGIES FOR STRUCTURAL & MULTIFUNCTIONAL MATERIALS AND SYSTEMS
Thermal Expansion Coefficient Controlled Cu-ZrW₂-_xMo_xO₈ Cermet Materia l Prepared using Spark Plasma Sintering 233
Hui Wei, Midori Oe, Ryo Inoue, Akihisa Aimi, Kenjiro Fujimoto, and Keishi Nishio
Influences of Laser Condition and Slit Shape on Joinability of (Zircaloy-SiC/SiC Composite Tube Joint 241
Hisashi Serizawa, Yuji Sato, Masahiro Tsukamoto, Hirotaka Motoki, Yuuki Asakura, Joon-Soo Park, Akira Kohyama, Naofumi Nakazato,and Hirotatsu Kishimoto
Electroconductive Oxide Ceramics with Graphene-Encapsulated Fillers 251
I. Hussainova, M. Drozdova, R. Ivanov, S. Kale, and I. Jasiuk
Introduction ix
MECHANICAL BEHAVIOR AND PERFORMANCE OF CERAMICS AND COMPOSITES
Fracture Toughness of Modern and Ancient Glasses and Glass Ceramics as Measured by the SEPB Method 3
G. D. Quinn, J. J. Swab, and P. Patel
Erosion Behavior in a Gas Turbine Grade Oxide/Oxide Ceramic Matrix Composite 15
M. J. Presby, N. Kedir, L. J. Sanchez, C. Gong, D. C. Faucett, S. R. Choi,and G. N. Morscher
Applying ASTM International C1421 to Glasses and Optical Ceramics 27
Jonathan A. Salem and Michael G. Jenkins
Effect of Control Mode and Test Rate on the Measured Fracture Toughness of Advanced Ceramics 41
Bronson D. Hausmann and Jonathan A. Salem
In-Situ Study on SiC-Si Interfacial Bonding Strength of Reaction Bonded SiC/Si Composites 51
C. Hsu, Y. Zhang, P. Karandikar, F. Deng, and C. Ni
Evaluation of New Technique to Estimate Yield Stress in Brittle Materials via Spherical Indentation Testing 61
B. L. Hackett, A. A. Wereszczak, and G. M. Pharr
ADVANCED CERAMIC COATINGS FOR STRUCTURAL,ENVIRONMENTAL, AND FUNCTIONAL APPLICATIONS
Oxidation Study of an Ultra High Temperature Ceramic Coating Based on HFSiCN 75
Dagny Sacksteder, Deborah L. Waters, and Dongming Zhu
15TH INTERNATIONAL SYMPOSIUM ON SOLID OXIDE FUEL CELLS (SOFC): MATERIALS, SCIENCE, AND TECHNOLOGY
Investigation of (La_1-X,Ca_X)(Ni_0.25Fe_0.25Cr_0.25Co_0.25)O₃ for Solid Oxide Fuel Cells Cathode Materials 87
Sai Ram Gajjala, Zhezhen Fu, and Rasit Koc
Development of Cathode Contacting for SOFC Stacks 99
K. Sick, N. Grigorev, N.H. Menzler, and O. Guillon
Microstruct ure Modification in the Electrodes to Enhance Performance of the Anode-Supported Solid Oxide Fuel Cell 113
Chun-Yen Yeh, Tai-Nan Lin, Hong-Yi Kuo, Ming-Wei Liao, Yu-Ming Chen,Wei-Xin Kao, Ruey-Yi Lee, and Sheng-Wei Lee
Preparation and Characterization of BaY0.2Ce0.7Zr0.1O3-¿ Ceramic Powder by Glycine Nitrate Combustion (GNC) Process for Proton-conducting Solid Oxide Fuel Cell 123
Wei-Xin Kao, Tai-Nan Lin, Ming-Wei Liao, Hong-Yi Kuo, Chun-Yen Yeh, Yu-Ming Chen, and Ruey-yi Lee
Effects of Composite Ratio of Vermiculite/Talc Seal Material on Gas Leak Properties 131
Jie Xu and Seiichi Suda
Performance Test for Anode-Supported and Metal-Supported Solid Oxide Electrolysis Cell under Different Current Densities 139
Szu-Han Wu, Jing-Kai Lin, Wei-Hong Shiu, Chien-Kuo Liu, Tai-Nan Lin, Ruey-Yi Lee, Huan-Chan Ting, Hung-Hsiang Lin, and Yung-Neng Cheng
Protective Coatings for SOFC Metallic Interconnects 149
Mark K. King Jr. and Manoj K. Mahapatra
Development of Portable Solid Oxide Fuel Cell System Driven by Hydrocarbon and Alcohol Fuels 159
Hirofumi Sumi, Hiroyuki Shimada, Toshiaki Yamaguchi, Yoshinobu Fujishiro and Masanobu Awano
Phase Field Modelling of Microstructural Changes in Ni/YSZ Solid Oxide Electrolysis Cell Electrodes 165
M. Trini, S. De Angelis, P. S. Jørgensen, A. Hauch, M. Chen and P. V. Hendriksen
Development of Fe/Cr Alloy-Supported Solid Oxide Fuel Cell by Plasma Technique 177
Sheng-Fu Yang , Chun-Huang Tsai, Chun-Liang Chang, Cheng-Yun Fu,Ruey-Yi Lee, Chien-Kuo Liu, and Huei-Long Lee
ARMOR CERAMICS: CHALLENGES AND NEW DEVELOPMENTS
Effects of Hardness and Toughness of Ceramic in a Ceramic Armour Module against Long Rod Impacts 187
W. L. Goh, B. Luo, Z. Zeng, J. Yuan, and K. W. Ng
Mesoscale Simulations of Boron Carbide Subjected to Shockwave Propagation 199
Brady Aydelotte, Jennifer Sietins, Clara Mock, Carli Moorehead and Timothy Holmquist
First Principles Model of Yttrium Adsorption on Boron Suboxide (0001) Surface 205
J. Synowczynski-Dunn, K. Behler, J. C. LaSalvia, C. Marvel, and M. Harmer
Generation of Polycrystalline Microstructures for the Discretization On-The-Fly of FE Models for Multi-Scale Simulations 213
S. Falco, N. Bombace, and N. Petrinic
ADVANCED MATERIALS AND TECHNOLOGIES FOR DIRECT THERMAL ENERGY CONVERSION AND RECHARGEABLE ENERGY STORAGE
The Tape-Casting and PAS Sintering of LLZO Ceramic Membrane Electrolyte 223
Fei Chen, Shiyu Cao, Xing Xiang, Dunjie Yang, Wenping Zha, Junyang Li, Qiang Shen, and Lianmeng Zhang
12TH INTERNATIONAL SYMBOSIUM ON ADVANCED PROCESSING & MANUFACTURING TECHNOLOGIES FOR STRUCTURAL MULTIFUNCTIONAL TECHNOLOGIES FOR STRUCTURAL & MULTIFUNCTIONAL MATERIALS AND SYSTEMS
Thermal Expansion Coefficient Controlled Cu-ZrW_2-xMo_xO₈ Cermet Materia l Prepared using Spark Plasma Sintering 233
Hui Wei, Midori Oe, Ryo Inoue, Akihisa Aimi, Kenjiro Fujimoto, and Keishi Nishio
Influences of Laser Condition and Slit Shape on Joinability of (Zircaloy-SiC/SiC Composite Tube Joint 241
Hisashi Serizawa, Yuji Sato, Masahiro Tsukamoto, Hirotaka Motoki, Yuuki Asakura, Joon-Soo Park, Akira Kohyama, Naofumi Nakazato,and Hirotatsu Kishimoto
Electroconductive Oxide Ceramics with Graphene-Encapsulated Fillers 251
I. Hussainova, M. Drozdova, R. Ivanov, S. Kale, and I. Jasiuk

Product details

• Authors: Salem, J Salem, Jonathan Salem, Jonathan Koch Salem, Valerie Wiesner
• Assisted by: Palani Balaya (Editor), Balaya Palani (Editor), Narottam P Bansal (Editor), Narottam P. Bansal (Editor), Bansal Narottam P. (Editor), Zhengyi Fu (Editor), Fu Zhengyi (Editor), Dietmar Koch (Editor), Mihails Kusnezoff (Editor), Kusnezoff Mihails (Editor), Jerry C Lasalvia (Editor), Jerry C. Lasalvia (Editor), LaSalvia Jerry C. (Editor), Peter Mechnich (Editor), Tatsuki Ohji (Editor), Ohji Tatsuki (Editor), Jonathan Salem (Editor), Salem Jonathan (Editor)
• Publisher: Wiley, John and Sons Ltd
• Languages: English
• Product format: Hardback
• Released: 31.01.2019
• EAN: 9781119543268
• ISBN: 978-1-119-54326-8
• No. of pages: 268
• Series: Ceramic Engineering and Scienc; Ceramic Engineering and Science Proceedings; Ceramic Engineering and Scienc
• Subjects: Natural sciences, medicine, IT, technology > Technology > General, dictionaries; Materials science, TECHNOLOGY & ENGINEERING / Materials Science / General