Read more
Informationen zum Autor Dr. F. Pacheco Torgal is a Principal Investigator at the University of Minho in Portugal. He holds the title of Counsellor at the Portuguese Engineers Association. He is a member of the editorial boards for nine international journals. Over the last 10 years he has participated in the research decision for more than 460 papers and has also acted as a Foreign Expert on the evaluation of 22 PhD thesis. Over the last 10 years he has also been a Member of the Scientific Committees for more than 60 conferences, most of them held in Asian countries. He is also a grant assessor for several scientific institutions in 15 countries, including the UK, US, Netherlands, China, France, Australia, Kazakhstan, Belgium, Spain, Czech Republic, Chile, Saudi Arabia, UA. Emirates, Croatia, Poland, and the EU Commission. In the last 10 years, he reviewed more than 70 research projects. João Labrincha is Associate Professor in the Materials and Ceramics Engineering Department of the University of Aveiro, Portugal, and member of the CICECO research unit. He has registered 22 patent applications, and has published over 170 papers. Klappentext This book provides an updated state-of-the-art review on new developments in alkali-activation. The main binder of concrete! Portland cement! represents almost 80% of the total CO2 emissions of concrete which are about 6 to 7% of the Planet's total CO2 emissions. This is particularly serious in the current context of climate change and it could get even worse because the demand for Portland cement is expected to increase by almost 200% by 2050 from 2010 levels! reaching 6000 million tons/year. Alkali-activated binders represent an alternative to Portland cement having higher durability and a lower CO2 footprint.
List of contents
1: Introduction to Handbook of Alkali-activated Cements, Mortars and Concretes
Abstract
1.1 Brief overview on alkali-activated cement-based binders (AACB)
1.2 Potential contributions of AACB for sustainable development and eco-efficient construction
1.3 Outline of the book
Part One: Chemistry, mix design and manufacture of alkali-activated, cement-based concrete binders
2: An overview of the chemistry of alkali-activated cement-based binders
Abstract
2.1 Introduction: alkaline cements
2.2 Alkaline activation of high-calcium systems: (Na,K)2O-CaO-Al2O3-SiO2-H2O
2.3 Alkaline activation of low-calcium systems: (N,K)2O-Al2O3-SiO2-H2O
2.4 Alkaline activation of hybrid cements
2.5 Future trends
3: Crucial insights on the mix design of alkali-activated cement-based binders
Abstract
3.1 Introduction
3.2 Cementitious materials
3.3 Alkaline activators: choosing the best activator for each solid precursor
3.4 Conclusions and future trends
4: Reuse of urban and industrial waste glass as a novel activator for alkali-activated slag cement pastes: a case study
Abstract
4.1 Introduction
4.2 Chemistry and structural characteristics of glasses
4.3 Waste glass solubility trials in highly alkaline media
4.4 Formation of sodium silicate solution from waste glasses dissolution: study by 29Si NMR
4.5 Use of waste glasses as an activator in the preparation of alkali-activated slag cement pastes
4.6 Conclusions
Acknowledgements
Part Two: The properties of alkali-activated cement, mortar and concrete binders
5: Setting, segregation and bleeding of alkali-activated cement, mortar and concrete binders
Abstract
5.1 Introduction
5.2 Setting times of cementitious materials and alkali-activated binder systems
5.3 Bleeding phenomena in concrete
5.4 Segregation and cohesion in concrete
5.5 Future trends
5.6 Sources of further information and advice
6: Rheology parameters of alkali-activated geopolymeric concrete binders
Abstract
6.1 Introduction: main forming techniques
6.2 Rheology of suspensions
6.3 Rheometry
6.4 Examples of rheological behaviors of geopolymers
6.5 Future trends
7: Mechanical strength and Young's modulus of alkali-activated cement-based binders
Abstract
7.1 Introduction
7.2 Types of prime materials - solid precursors
7.3 Compressive and flexural strength of alkali-activated binders
7.4 Tensile strength of alkali-activated binders
7.5 Young's modulus of alkali-activated binders
7.6 Fiber-reinforced alkali-activated binders
7.7 Conclusions and future trends
7.8 Sources of further information and advice
8: Prediction of the compressive strength of alkali-activated geopolymeric concrete binders by neuro-fuzzy modeling: a case studys
Abstract
8.1 Introduction
8.2 Data collection to predict the compressive strength of geopolymer binders by neuro-fuzzy approach
8.3 Fuzzy logic: basic concepts and rules
8.4 Results and discussion of the use of neuro-fuzzy modeling to predict the compressive strength of geopolymer binders
8.5 Conclusions
9: Analysing the relation between pore structure and permeability of alkali-activated concrete binders
Abstract
9.1 Introduction
9.2 Alkali-activated metakaolin (AAM) binders
9.3 Alkali-activated fly ash (AAFA) binders
9.4 Alkali-activated slag (AAS) binders
9.5 Conclusions and future trends
10: Assessing the shrinkage and creep of alkali-activated concrete binders
Abstract
10.1 Introduction
10.2 Shrinkage and creep in concrete
10.3 Shrinkage in alkali-activated concrete
10.4 Creep in alkali-activated concrete
10.5 Factors affecting shrinkage and creep
10.6 Laboratory work and standard tests
10.7 Methods of predicti
Report
"This handbook is a great impetus for an accelerated commercialization of an eco-friendly alternative binder technology with more in-depth understanding of its strength, weakness, opportunities and threats...will go a long way to fulfil the essential requirements of transferring the technology from the laboratory to the field." --Dr Anjan K. Chatterjee, Fellow of the Indian National Academy of Engineering and Chairman of Conmat Technologies Pvt Ltd., Kolkata (From the foreword)
