Applied Welding Engineering - Processes, Codes, and Standards

While there are several books on market that are designed to serve a company's daily shop-floor needs. Their focus is mainly on the physically making specific types of welds on specific types of materials with specific welding processes. There is nearly zero focus on the design, maintenance and troubleshooting of the welding systems and equipment. Applied Welding Engineering: Processes, Codes and Standards is designed to provide a practical in-depth instruction for the selection of the materials incorporated in the joint, joint inspection, and the quality control for the final product. Welding Engineers will also find this book a valuable source for developing new welding processes or procedures for new materials as well as a guide for working closely with design engineers to develop efficient welding designs and fabrication procedures.

Applied Welding Engineering: Processes, Codes and Standards is based on a practical approach. The book's four part treatment starts with a clear and rigorous exposition of the science of metallurgy including but not limited to: Alloys, Physical Metallurgy, Structure of Materials, Non-Ferrous Materials, Mechanical Properties and Testing of Metals and Heal Treatment of Steels. This is followed by self-contained sections concerning applications regarding Section 2: Welding Metallurgy & Welding Processes, Section 3: Nondestructive Testing, and Section 4: Codes and Standards. The author's objective is to keep engineers moored in the theory taught in the university and colleges while exploring the real world of practical welding engineering. Other topics include: Mechanical Properties and Testing of Metals, Heat Treatment of Steels, Effect of Heat on Material During Welding, Stresses, Shrinkage and Distortion in Welding, Welding, Corrosion Resistant Alloys-Stainless Steel, Welding Defects and Inspection, Codes, Specifications and Standards.

The book is designed to support welding and joining operations where engineers pass plans and projects to mid-management personnel who must carry out the planning, organization and delivery of manufacturing projects. In this book, the author places emphasis on developing the skills needed to lead projects and interface with engineering and development teams. In writing this book, the book leaned heavily on the author's own experience as well as the American Society of Mechanical Engineers (www.asme.org), American Welding Society (www.aws.org), American Society of Metals (www.asminternational.org), NACE International (www.nace.org), American Petroleum Institute (www.api.org), etc. Other sources includes The Welding Institute, UK (www.twi.co.uk), and Indian Air force training manuals, ASNT (www.asnt.org), the Canadian Standard Association (www.cas.com) and Canadian General Standard Board (CGSB) (www.tpsgc-pwgsc.gc.ca).

Rules for developing efficient welding designs and fabrication procedures

Expert advice for complying with international codes and standards from the American Welding Society, American Society of Mechanical Engineers, and The Welding Institute(UK)

Practical in-depth instruction for the selection of the materials incorporated in the joint, joint inspection, and the quality control for the final product.

List of contents

Section 1: Introduction to Basic Metallurgy

Chapter 1: Introduction

Chapter 2: Alloys

Chapter 3: Physical Metallurgy

Chapter 4: Structure of Materials

Chapter 5: Production of Steels

Chapter 6: Classification of Steels

Chapter 7: Cast Iron

Chapter 8: Stainless Steels

Chapter 9: Non-Ferrous Materials

Chapter 10: Working with Metals

Chapter 11: Mechanical Properties and Testing of Metals

Chapter 12: Heal Treatment of Steels

Section 2: Welding Metallurgy & Welding Processes

Chapter 1: Introduction

Chapter 2: Physics of Welding

Chapter 3: Welding and Joining Processes

Chapter 4: Effect of Heat on Material During Welding

Chapter 5: Stresses, Shrinkage and Distortion in Weldments

Chapter 6: Welding, Corrosion Resistant Alloys-Stainless Steel

Chapter 7: Welding Non-Ferrous Metals and Alloys

Chapter 8: Welding Defects and Inspection

Section 3: Nondestructive Testing

Chapter-1: Introduction

Chapter-2: Visual Inspection (VT)

Chapter 3: Radiography

Chapter-4: Magnetic particle Testing

Chapter-5: Peneterant Testing

Chapter-6: Ultrasonic Testing

Chapter 7: Eddy Current Testing

Chapter 8: Acoustic Emission Testing (AET)

Chapter 9: Ferrite Testing

Chapter 10: Pressure Testing

Section 4: Codes and Standards

Chapter 1: Introduction

Chapter 2: Codes, Specifications and Standards

About the author

Ramesh Singh, MS, IEng, MWeldI, is registered as Incorporated Engineer with British Engineering Council UK and a Member of The Welding Institute, UK. He is a Senior Principal Engineer (Materials, Welding and Corrosion) for Gulf Interstate Engineering, Houston, TX. Ramesh Singh is a graduate from Indian Air force Technical Academy, with diplomas in Structural Fabrication Engineering and Welding Technology. He has been member and officer of Canadian Standard Association and NACE and served on several technical committees. He has worked in industries spanning over aeronautical, alloy steel castings, fabrication, machining, welding engineering, petrochemical, and oil and gas. He has written several technical papers and published articles in leading industry magazines, addressing the practical aspects of welding, construction and corrosion issues relating to structures, equipments and pipeline.

Product details

• Authors: Ramesh Singh, Ramesh P. Singh
• Publisher: ELSEVIER SCIENCE BV
• Languages: English
• Product format: Hardback
• Released: 01.11.2011
• EAN: 9780123919168
• ISBN: 978-0-12-391916-8
• No. of pages: 376
• Series: Butterworth-Heinemann
• Subject: Natural sciences, medicine, IT, technology > Technology > Mechanical engineering, production engineering