Fr. 160.00

Integrated Circuit Design for Radiation Environments

English · Hardback

Shipping usually within 1 to 3 weeks (not available at short notice)

Description

Read more










A practical guide to the effects of radiation on semiconductor components of electronic systems, and techniques for the designing, laying out, and testing of hardened integrated circuits

This book teaches the fundamentals of radiation environments and their effects on electronic components, as well as how to design, lay out, and test cost-effective hardened semiconductor chips not only for today's space systems but for commercial terrestrial applications as well. It provides a historical perspective, the fundamental science of radiation, and the basics of semiconductors, as well as radiation-induced failure mechanisms in semiconductor chips.

Integrated Circuits Design for Radiation Environments starts by introducing readers to semiconductors and radiation environments (including space, atmospheric, and terrestrial environments) followed by circuit design and layout. The book introduces radiation effects phenomena including single-event effects, total ionizing dose damage and displacement damage) and shows how technological solutions can address both phenomena.
* Describes the fundamentals of radiation environments and their effects on electronic components
* Teaches readers how to design, lay out and test cost-effective hardened semiconductor chips for space systems and commercial terrestrial applications
* Covers natural and man-made radiation environments, space systems and commercial terrestrial applications
* Provides up-to-date coverage of state-of-the-art of radiation hardening technology in one concise volume
* Includes questions and answers for the reader to test their knowledge

Integrated Circuits Design for Radiation Environments will appeal to researchers and product developers in the semiconductor, space, and defense industries, as well as electronic engineers in the medical field. The book is also helpful for system, layout, process, device, reliability, applications, ESD, latchup and circuit design semiconductor engineers, along with anyone involved in micro-electronics used in harsh environments.

List of contents










About the Authors xiii
Preface xix
Acknowledgments xxiii
Glossary of Terms xxv
1 Introduction and Historical Perspective 1
1.1 Introduction 1
1.2 Discovery of X-Rays, Radiation, and Subatomic Particles 2
1.3 The Nuclear Age 8
1.4 The Space Age 9
1.5 Semiconductors - Revolution, Evolution, and Scaling 15
1.6 Beginning of Ionizing Radiation Effects in Semiconductors 20
1.7 Beginning of Single-Event Effects in Semiconductors 22
1.8 Summary and Closing Comments 26
References 27
2 Radiation Environments 31
2.1 Introduction 31
2.2 X-Rays, Gamma Rays, and the Atom 31
2.2.1 X-Rays 31
2.2.2 X-Ray Absorption 34
2.2.3 Auger Electrons 36
2.2.4 Nuclear Structure and Binding Energy 36
2.2.4.1 Models of the Nucleus 38
2.2.5 Alpha and Beta Decay 50
2.2.5.1 Alpha Decay 51
2.2.5.2 Beta Decay 52
2.2.6 Gamma-Ray Emission or Gamma Decay 53
2.2.7 Other Types of Nuclear Radiation 54
2.3 Natural Radioactivity 55
2.3.1 Exponential Decay 55
2.3.2 Decay Series 56
2.4 The Space Environment 58
2.4.1 Solar Radiation 59
2.4.2 Trapped Radiation 62
2.4.3 Cosmic Rays 66
2.4.4 Atmospheric Neutrons 69
2.5 The Nuclear Reactor Environment 71
2.6 The Weapons Environment 75
2.7 The Environment in High-Energy Physics Facilities 78
2.8 Summary and Closing Comments 80
References 81
3 Radiation Effects in Semiconductor Materials 85
3.1 Introduction 85
3.2 Basic Effects 86
3.2.1 Heavy Charged Particles 86
3.2.1.1 Stopping Power 86
3.2.1.2 Electronic Stopping 87
3.2.1.3 Nuclear Stopping 92
3.2.2 Electrons 93
3.2.2.1 Electromagnetic Radiation 93
3.2.2.2 Stopping Power 96
3.2.3 Neutrons 101
3.2.3.1 Neutron Cross Section 102
3.2.3.2 Interactions with Matter 103
3.2.4 Photons (X-Rays, Gamma Rays) 106
3.2.4.1 Photoelectric Effect 107
3.2.4.2 Compton Scattering 108
3.2.4.3 Pair Production 109
3.2.4.4 Photonuclear Reactions 110
3.3 Charge Trapping in Silicon Dioxide 111
3.3.1 Charge Generation/Recombination 111
3.3.1.1 Geminate and Columnar Models 112
3.3.1.2 Geminate Recombination 113
3.3.1.3 Columnar Recombination 115
3.3.1.4 Numerical Methods 117
3.3.2 Hole Trapping and Transport 118
3.3.2.1 E¿ Centers 120
3.3.2.2 Continuous-Time Random-Walk (CTRW) 122
3.3.3 The Silicon/Silicon Dioxide Interface 124
3.3.3.1 Interface Traps 125
3.3.3.2 Border Traps 127
3.3.3.3 Hydrogen 128
3.3.3.4 ELDRS 130
3.4 Bulk Damage 131
3.5 Summary and Closing Comments 133
References 135
4 Radiation-Induced Single Events 143
4.1 Introduction - Single-Events Effects (SEE) 143
4.1.1 Single-Event Upsets (SEU) 143
4.1.2 Multiple-Bit Upset (MBU) 143
4.1.3 Single-Event Transients (SET) 144
4.1.4 Single-Event Functional Interrupts (SEFIs) 144
4.1.5 Single-Event Disturb (SED) 145
4.1.6 Single-Event Snapback (SESB) 146
4.1.7 Single-Event Latchup (SEL) 146
4.1.8 Single-Event Burnout (SEB) 146
4.1.9 Single-Event Gate Rupture (SEGR) 147
4.1.10 Single-Event Hard Errors (SHE) 147
4.2 Single-Event Upset (SEU) 148
4.2.1 SEU - Memory 148
4.2.2 SEU in CMOS Memory 148
4.2.3 SEU in Bipolar Memory 148
4.2.4 SEU in CMOS SRAM 149
4.2.5 SEU in Future Technology - FINFETs 149
4.3 SEU - Particle Sources 149
4.3.1 SEU Source - Alpha Particles 150
4.3.2 SEU Source - Pions and Muons 152
4.3.3 SEU - Neutrons 153
4.3.4 SEU Source - Protons 153
4.3.5 SEU - Heavy Ions 154
4.4 Single-Event Gate Rupture (SEGR) 154
4.4.1 Definition SEGR 155
4.4.2 SEGR Source - Ion Track 155
4.4.3 SEGR Source - Failure Mechanism 156
4.4.4 SEGR - Modeling and Simulation 156
4.4.5 Power Transistors and SEGR 156
4.4.5.1 Lateral Power Transistors SEGR 156
4.4.5.2 Vertical MOS (VMOS) SEGR 157
4.4.5.3 Advanced Technologies - Planar MOSFET SEGR 157
4.5 Single-Event Transients (SETs) 158
4.5.1 SET Definition 158
4.5.2 SET Source 158
4.5.3 SET Source Failure Mechanisms 159
4.5.4 SET in Integrated Circuits 159
4.5.4.1 Digital Circuitry 159
4.5.4.2 Continuous Time Analog Circuitry 159
4.5.5 Prediction and Hardening 159
4.6 Single-Event Latchup (SEL) 159
4.6.1 SEL Definition 160
4.6.2 SEL Source 160
4.6.3 SEL Time Response 161
4.6.4 SEL Maximum Charge Collection Evaluation in a Parallelepiped Region 162
4.6.5 A SEL Design Practice 164
4.6.6 SEL Semiconductor Device Simulation 165
4.7 Summary and Closing Comments 165
References 166
5 Radiation Testing 173
5.1 Introduction 173
5.1.1 Radiation Units and Measurements 173
5.2 Radiation Testing and Sources 175
5.2.1 Total Ionizing Dose (TID) Testing 176
5.2.2 Total Ionizing Dose (TID) Sources 179
5.2.3 Single-Event Effects (SEE) Testing 182
5.2.4 Single-Event Effects (SEE) Sources and Facilities 187
5.2.5 Neutron Testing 192
5.2.6 Neutron Sources 193
5.2.7 Proton Testing 195
5.2.8 Proton Sources 196
5.2.9 Transient Gamma Testing 197
5.2.10 Transient Gamma Sources 198
5.3 Summary and Closing Comments 201
References 204
6 Device Modeling and Simulation Techniques 209
6.1 Introduction 209
6.2 Device Modeling 210
6.2.1 Circuit Simulators 211
6.2.2 Intrinsic Models 212
6.2.3 Composite Models and Inline Subcircuits 212
6.2.4 Analysis and Statistics Programs 214
6.3 Radiation Effects on Semiconductor Devices 215
6.3.1 MOS Capacitors and Transistors 215
6.3.1.1 MOS Capacitors 216
6.3.1.2 MOS Transistors 219
6.3.2 Diodes and Bipolar Transistors 224
6.3.2.1 Diodes 224
6.3.2.2 Bipolar Transistors 225
6.3.3 Power Devices 230
6.3.3.1 DMOS Composite Models 231
6.3.3.2 Operating Voltage 232
6.3.4 Other Devices 232
6.3.4.1 Junction Field Effect Transistors (JFETs) 232
6.3.4.2 Resistors 234
6.3.4.3 Capacitors 235
6.3.5 Some Modeling Challenges 235
6.4 Circuit Simulation 236
6.4.1 Corner Simulation 236
6.4.2 SEE Simulation 239
6.5 Summary and Closing Comments 242
References 244
7 Radiation Semiconductor Process and Layout Solutions 249
7.1 Introduction 249
7.2 Substrate Hardened Technologies 249
7.2.1 Silicon-on-Insulator (SOI) Technologies 250
7.2.1.1 Separation by Implanted Oxygen (SIMOX) 250
7.2.1.2 Silicon-Bonded (SIBOND) Technology 250
7.2.2 Silicon on Sapphire (SOS) 251
7.2.3 Silicon on Diamond (SOD) 252
7.2.4 Silicon on Nothing (SON) 252
7.3 Oxide Hardening Technologies 253
7.3.1 Oxide Growth and Fluorination of Oxide 253
7.3.2 MOSFET Gate Oxide Hardening 253
7.3.3 Recessed Oxide (ROX) Hardening 254
7.3.4 LOCOS Isolation Hardening 254
7.3.5 Shallow Trench Isolation (STI) Hardening 254
7.4 CMOS Latchup Process Solutions 255
7.5 CMOS Substrates - High-Resistance Substrates 255
7.5.1 50¿-cm Substrate Resistance 259
7.6 Wells 260
7.6.1 Single Well - Diffused N-Well 261
7.6.2 Single Well - Retrograde N-Well 261
7.6.3 Dual-Well Technology 262
7.6.3.1 P-well and P++ Substrate 262
7.6.3.2 P-Well and P+ Connecting Implant 263
7.7 Triple-Well Technology 264
7.7.1 Triple Well - Full Separation of Wells 264
7.7.2 Triple Well - Merged Triple Well 265
7.7.3 Triple Well - Merged Triple Well with Blanket Implant 266
7.8 Sub-Collectors 266
7.8.1 Epitaxial Grown Sub-Collector 266
7.8.2 Implanted Sub-Collector 267
7.8.3 Sub-Collector - NPN and PNP Bipolar Current Gain 267
7.8.4 Sub-Collector - Beta Product ¿PNP¿NPN 267
7.9 Heavily Doped Buried Layers (HDBL) 268
7.9.1 Buried Implanted Layer for Lateral Isolation (BILLI) Process 268
7.9.2 Continuous HDBL Implant 268
7.9.3 Buried Guard Ring (BGR) 270
7.10 Isolation Concepts 270
7.10.1 LOCOS Isolation 270
7.10.2 Shallow Trench Isolation (STI) 270
7.10.3 Dual Depth Isolation 271
7.10.4 Trench Isolation (TI) 272
7.10.4.1 Trench Isolation (TI) and Sub-Collector 274
7.11 Deep Trench 277
7.11.1 Deep Trench (DT) within PNPN Structure 279
7.11.2 Deep Trench Structure and Sub-Collector 281
7.11.3 Deep Trench Structure and Merged Triple Well 283
7.12 Layout Solutions 284
7.12.1 Polysilicon Bound Structures 284
7.12.2 Parasitic Isolation Device (PID) 284
7.13 Summary and Closing Comments 286
References 287
8 Single-Event Upset Circuit Solutions 293
8.1 Introduction 293
8.2 CMOS DRAM SEU Circuit Solutions 293
8.2.1 CMOS DRAM Redundancy 294
8.2.2 CMOS DRAM with SRAM Error Correction 294
8.3 CMOS SRAM SEU Circuit Solution 296
8.3.1 CMOS SRAM Four-Device Cell 296
8.3.2 CMOS SRAM Six-Device Cell 297
8.3.3 CMOS SRAM 12-Device Cell 298
8.4 Bipolar SRAM 299
8.4.1 Bipolar SRAM Cell with Resistor Loads 300
8.4.2 Bipolar SRAM Cell with Resistor Loads and Schottky Clamps 300
8.4.3 Bipolar SRAM Cell with PNP Transistors 301
8.5 Bipolar SRAM Circuit Solutions 301
8.6 SEU in CMOS Logic Circuitry 302
8.7 Summary and Closing Comments 302
References 303
9 Latchup Circuit Solutions 305
9.1 Introduction 305
9.2 Power Supply Concepts 305
9.2.1 Power Supply Current Limit - Series Resistor 305
9.2.2 Power Supply Current Limit - Current Source 306
9.2.3 Power Supply Solutions - Voltage Regulator 307
9.2.4 Latchup Circuit Solutions - Power Supply Decoupling 308
9.3 Overshoot and Undershoot Clamp Networks 311
9.3.1 Passive Clamp Networks 312
9.3.2 Active Clamp Networks 313
9.3.3 Dynamic Threshold Triple Well Passive and Active Clamp Networks 316
9.4 Passive and Active Guard Rings 318
9.4.1 Passive Guard Ring Circuits and Structures 318
9.4.2 Active Guard Ring Circuits and Structures 319
9.5 Triple-Well Noise and Latchup Suppression Structures 326
9.6 System-Level Latchup Issues 326
9.7 Summary and Closing Comments 327
References 329
10 Emerging Effects and Future Technology 333
10.1 Introduction 333
10.2 Radiation Effects in Advanced Technologies 333
10.2.1 Moore's Law, Scaling, and Radiation Effects 334
10.2.2 Technology Lifetime and Reliability 334
10.2.2.1 New Missions 335
10.2.2.2 Throwaway Mentality 335
10.2.2.3 New Space Entrants 335
10.2.3 Terrestrial Issues 335
10.2.4 Space Mission Issues 335
10.2.5 Server Farms 335
10.2.6 Automotive 336
10.2.7 Internet of Things (IoT) 336
10.2.8 More than Moore 336
10.3 Radiation Effects in Semiconductor Nanostructures 336
10.3.1 Planar MOSFETs in Sub-25 nm 337
10.3.2 Bulk FinFET 338
10.3.3 SOI FinFET 339
10.3.4 3-D Circuits 340
10.4 Radiation Effects and Advanced Packaging 340
10.4.1 Radiation Effects and 2.5-D Circuits and Technology 341
10.4.2 Radiation Effects and 3-D Circuits and Technology 341
10.4.3 More than Moore and 3-D Integration 342
10.5 Ruggedized Capability 342
10.5.1 Ruggedized Capability for Radiation 343
10.5.2 Ruggedized Capability for High Temperature 343
10.6 Radiation Models 343
10.7 A Nuclear World 344
10.8 Summary and Closing Comments 344
References 345
Index 347


About the author










STEPHEN J. GAUL is a Senior Principal Engineer at Renesas Electronics Americas, Inc., Florida, USA. He has worked in the semiconductor/integrated circuit field for over 35 years and has authored many papers and over 35 patents, many specific to radiation-hard/radiation-tolerant techniques. NICOLAAS VAN VONNO is currently a Principal Engineer at Renesas Electronics Americas, Inc., Florida, USA, and has been an independent consultant in the radiation effects field. He has been Guest Editor, Session Chairman, and Short Course Chairman for the IEEE Nuclear and Space Radiation Effects Conference (NSREC). STEVEN H. VOLDMAN, Ph.D., is a Consultant on ESD and latchup, as well as invention and patenting. He is a Fellow of the Electrical and Electronics Engineers (IEEE) and author of over 10 books and 262 patents. WESLEY H. MORRIS is President of Silicon-X (Technology focus), hardening CMOS devices to radiation and extreme temperatures. His career experience includes development of RH CMOS devices with SOS (RCA) and SOI (Harris), the first to prove bulk CMOS devices can be made latchup immune to extreme SEE radiation and operate reliably at high temperatures (250C). Morris is an author/inventor with multiple papers and patents related to RH and HT topics.

Customer reviews

No reviews have been written for this item yet. Write the first review and be helpful to other users when they decide on a purchase.

Write a review

Thumbs up or thumbs down? Write your own review.

For messages to CeDe.ch please use the contact form.

The input fields marked * are obligatory

By submitting this form you agree to our data privacy statement.