Materials Processing Fundamentals

Klappentext Materials Processing Fundamentals provides researchers and industry professionals with complete guidance on the synthesis, analysis, design, monitoring, and control of metals, materials, and metallurgical processes and phenomena. Along with the fundamentals, it covers modeling of diverse phenomena in processes involving iron, steel, non-ferrous metals, and composites. It also goes on to examine second phase particles in metals, novel sensors for hostile-environment materials processes, online sampling and analysis techniques, and models for real-time process control and quality monitoring systems. "The book is a good addition in the libraries of Institutes of Higher Learning, Research Institutes and development divisions of steel and nonferrous plants." ("Scientific.net", 1 July 2013) Materials Processing Fundamentals provides researchers and industry professionals with complete guidance on the synthesis, analysis, design, monitoring, and control of metals, materials, and metallurgical processes and phenomena. Inhaltsverzeichnis Preface xiAbout the Editors xiiiProcess Metallurgy of SteelEvolution of Inclusions in Ti-Bearing Ultra-Low Carbon Steel during RH Refining Process ...3W. Yang, S. Li, Y. Li, X. Wang , L. Zhang, X. Liu, and Q. ShanMass Action Concentration Model of CaO-MgO-FeO-Al2O3-SiO2 Slag Systems and Its Application to the Formation Mechanism of MgO?EAl2O3 Spinel Type Inclusion in Casing Steel 17H. Tang, J. Li, and C. JiTheory Analysis of Steel Cleanliness Control during Electroslag Remelting 31C. Shi, X. Chen, Y. Luo, and H. GuoFormation and Drop of Metal Droplets in Slag Bath of Electroslag Remelting Processes .39B. Li, R. Li, and B. WangStudy on Flow-Reaction Desulfurization of RH by Physical Experiment ..45H. Yang, J. Li, Z. Gao, F. Song, and W. YangModeling of Transient Fluid Flow, Solidification Processes and Bubble Transport in Continuous Casting Mold ...53Z. Liu, B. Li, and M. JiangNumerical Analysis of Coupled Fluid Flow, Heat Transfer and Solidification in Ultra-thick Slab Continuous Casting Mold .63X. Xie, D. Chen, M. Long, L. Zhang, J. Shen, and Y. MaMeasurement and Observation of the Filling Process of Steel Castings .73J. Kang, G. Nie, H. Long, R. You, X. Hao, T. Wang, and C. ZhengPhysical Metallurgy of MetalsInfluence of Load Paths and Bake Hardening Conditions on the Mechanical Properties of Dual Phase Steel 83M. Asadi, and H. PalkowskiThe Effect of Phosphorus and Sulfur on the Crack Susceptibility of Continuous Casting Steel 89W. Wang, S. Luo, Z. Cai, and M. ZhuMathematical Modeling of Heat Transfer and Thermal Behaviour of Tool Steel H13 in Molten Aluminum Alloy A380 ..99T. Ding, J. Su, H. Hu, X. Nie, and R. BarronOptimization Investigation on the Soft Reduction Parameters of Medium Carbon Microalloy Steel ...109C. Xiao, J. Zhang, Y. Luo, L. Wu, and S. WangEffect of Microstructure Evolution on Hot Cracks of HSLA Steel during Hot Charge Process ...117J. Li, Q. Wang, Y. Lu, B. Wang, and S. ZhangA New Method for Ultrasonic Treatment on the Melt of Steel 125G. Nie, J. Kang, Y. Hu, R. You, J. Ma, Y. Hu, and T. HuangMetallurgy of Non-Ferrous MetalsCorrosion Resistance of Zn-Sn Alloys Horizontally Directionally Solidified ..135M. Parra, C. Mendez, C. Schvezov, and A. AresHigh Speed Twin Roll Casting of Al-33 wt. % Cu Strips with Layered Structure-Inspired by Mathematical Modeling .143S. Sahoo, and S. GhoshFinite Element Modeling of Material Removal Rate in Powder Mixed Electrical Discharge Machining of Al-SiC Metal Matrix Composites .151U. Vishwakarma, A. Dvivedi, and P. KumarMulticriteria Optimization of Rotary Tool Electric Discharge Machining on Metal Matrix Composite ..159M. Cheema, A. Dvivedi, A. Sharma, and S. BiswasCharacterization of Pore Formation in A356 Alloy with Different Oxide Levels during Directional Solidification ...169H. Liao, W. Song, and Q. WangProcess Metallurgy of Non-Fer...

List of contents

Preface xi

About the Editors xiii

Process Metallurgy of Steel

Evolution of Inclusions in Ti-Bearing Ultra-Low Carbon Steel during RH Refining Process ...3
W. Yang, S. Li, Y. Li, X. Wang , L. Zhang, X. Liu, and Q. ShanMass Action Concentration Model of CaO-MgO-FeO-Al2O3-SiO2 Slag Systems and Its Application to the Formation Mechanism of MgO?EAl2O3 Spinel Type Inclusion in Casing Steel 17
H. Tang, J. Li, and C. Ji

Theory Analysis of Steel Cleanliness Control during Electroslag Remelting 31
C. Shi, X. Chen, Y. Luo, and H. Guo

Formation and Drop of Metal Droplets in Slag Bath of Electroslag Remelting Processes .39
B. Li, R. Li, and B. Wang

Study on Flow-Reaction Desulfurization of RH by Physical Experiment ..45
H. Yang, J. Li, Z. Gao, F. Song, and W. Yang

Modeling of Transient Fluid Flow, Solidification Processes and Bubble Transport in Continuous Casting Mold ...53
Z. Liu, B. Li, and M. Jiang

Numerical Analysis of Coupled Fluid Flow, Heat Transfer and Solidification in Ultra-thick Slab Continuous Casting Mold .63
X. Xie, D. Chen, M. Long, L. Zhang, J. Shen, and Y. Ma

Measurement and Observation of the Filling Process of Steel Castings .73
J. Kang, G. Nie, H. Long, R. You, X. Hao, T. Wang, and C. Zheng

Physical Metallurgy of Metals

Influence of Load Paths and Bake Hardening Conditions on the Mechanical Properties of Dual Phase Steel 83
M. Asadi, and H. Palkowski

The Effect of Phosphorus and Sulfur on the Crack Susceptibility of Continuous Casting Steel 89
W. Wang, S. Luo, Z. Cai, and M. Zhu

Mathematical Modeling of Heat Transfer and Thermal Behaviour of Tool Steel H13 in Molten Aluminum Alloy A380 ..99
T. Ding, J. Su, H. Hu, X. Nie, and R. Barron

Optimization Investigation on the Soft Reduction Parameters of Medium Carbon Microalloy Steel ...109
C. Xiao, J. Zhang, Y. Luo, L. Wu, and S. Wang

Effect of Microstructure Evolution on Hot Cracks of HSLA Steel during Hot Charge Process ...117
J. Li, Q. Wang, Y. Lu, B. Wang, and S. Zhang

A New Method for Ultrasonic Treatment on the Melt of Steel 125
G. Nie, J. Kang, Y. Hu, R. You, J. Ma, Y. Hu, and T. Huang

Metallurgy of Non-Ferrous Metals

Corrosion Resistance of Zn-Sn Alloys Horizontally Directionally Solidified ..135
M. Parra, C. Mendez, C. Schvezov, and A. Ares

High Speed Twin Roll Casting of Al-33 wt. % Cu Strips with Layered Structure-Inspired by Mathematical Modeling .143
S. Sahoo, and S. Ghosh

Finite Element Modeling of Material Removal Rate in Powder Mixed Electrical Discharge Machining of Al-SiC Metal Matrix Composites .151
U. Vishwakarma, A. Dvivedi, and P. Kumar

Multicriteria Optimization of Rotary Tool Electric Discharge Machining on Metal Matrix Composite ..159
M. Cheema, A. Dvivedi, A. Sharma, and S. Biswas

Characterization of Pore Formation in A356 Alloy with Different Oxide Levels during Directional Solidification ...169
H. Liao, W. Song, and Q. Wang

Process Metallurgy of Non-Ferrous Metals

TMAH Wet Etching of Silicon Micro- and Nano-Fins for Selective Sidewall Epitaxy of III-Nitride Semiconductors .185
L. Liu, D. Myasishchev, V. Kuryatkov, S. Nikishin, H. Harris, and M. Holtz

Purification of Indium by Vacuum Distillation 193
Y. Deng, B. Yang, D. Li, B. Xu, and H. Xiong

Investigating Current Efficiency of Aluminum Electrolysis in NaF-KF-AlF3 System ..199
H. Ma, J. Xue, J. Li, and Y. Zhang

Recirculation of Materials and Environments

Effects of Ca and Na Containing Additives on WO3 Content in Sheelite Concentrates after Floatation Separation Process .209
J. Zhu, J. Xue, and K. Liu

Copper Removal from Molybdenite by Sulfidation-Leaching Process 217
R. Padilla, H. Letelier, and M. Ruiz

Physical Chemistry of Roasting and Leaching Reactions for Chromium Chemical Manufacturing and Its Impact on Environment - A Review .225
S. Sanchez-Segado, and A. Jha

Electrophoretic Classification of Ultrafine Silica Particles in Dilute Aqueous Suspension 237
R. Corpuz, and L. De

Report

"The book is a good addition in the libraries of Institutes of Higher Learning, Research Institutes and development divisions of steel and nonferrous plants." ( Scientific.net , 1 July 2013)

Product details

• Authors: Tms, Zhang, Lifeng Allanore Zhang
• Assisted by: Antoin Allanore (Editor), Antoine Allanore (Editor), Justin Crapps (Editor), Cong Wang (Editor), Cong Wang et al (Editor), James A. Yurko (Editor), Lifeng Zhang (Editor)
• Publisher: Wiley, John and Sons Ltd
• Languages: English
• Product format: Hardback
• Released: 14.03.2013
• EAN: 9781118605981
• ISBN: 978-1-118-60598-1
• No. of pages: 336
• Subject: Natural sciences, medicine, IT, technology > Technology > General, dictionaries