CHF 189.00

Combustion for Power Generation and Transportation
Technology, Challenges and Prospects

Englisch · Fester Einband

Versand in der Regel in 6 bis 7 Wochen

Beschreibung

Mehr lesen

This research monograph presents both fundamental science and applied innovations on several key and emerging technologies involving fossil and alternate fuel utilization in power and transport sectors from renowned experts in the field. Some of the topics covered include: autoignition in laminar and turbulent nonpremixed flames; Langevin simulation of turbulent combustion; lean blowout (LBO) prediction through symbolic time series analysis; lasers and optical diagnostics for next generation IC engine development; exergy destruction study on small DI diesel engine; and gasoline direct injection. The book includes a chapter on carbon sequestration and optimization of enhanced oil and gas recovery.  The contents of this book will be useful to researchers and professionals working on all aspects on combustion.

Über den Autor / die Autorin

Prof. Avinash Kumar Agarwal:
Prof. Avinash Kumar Agarwal joined IIT Kanpur in 2001. Prof. Agarwal was at ERC, University of Wisconsin, Madison, USA as a Post-Doctoral Fellow (1999 – 2001). His areas of interest are IC engines, combustion, alternative fuels, hydrogen, conventional fuels, lubricating oil tribology, optical diagnostics, laser ignition, HCCI, emission and particulate control, and large bore engines. Prof. Agarwal has published more than 200 peer reviewed international journal and conference papers. He is associate editor of ASME Journal of Energy Resources Technology, and International Journal of Vehicle Systems Modelling and Testing. He has edited “Handbook of Combustion” (5 Volumes; 3168 pages), published by Wiley VCH, Germany. Prof. Agarwal is a Fellow of SAE (2012), Fellow of ASME (2013) and a Fellow of INAE (2015). Prof. Agarwal is the recipient of Prestigious Shanti Swarup Bhatnagar Prize-2016 in Engineering Sciences.

Dr. Santanu De:
Dr. Santanu De is Assistant Professor in the Department of Mechanical Engineering, IIT Kanpur since December 2014. He received a Bachelor of Engineering degree from the North Bengal University in 2002, and an M. Tech. from IIT Kanpur in 2004, both in Mechanical Engineering. He received his PhD in Aerospace Engineering from IISc, Bangalore in 2012. Prior to joining IIT Kanpur, he served for two years at MTU as a postdoctoral research associate, and one year at the University of Stuttgart. His primary areas of research are numerical modeling of turbulent combustion, spray atomization and combustion, coal gasification and combustion. He is Associate Editor for the ‘Journal of Energy, Environment and Sustainability’.


Professor Ashok Pandey
:

Professor Ashok Pandey is Eminent Scientist at the Center of Innovative and Applied Bioprocessing, Mohali.  His major research interests are in the areas of microbial, enzyme and bioprocess technology. He has to his credit over 1150publications/communications, including 16 patents, 50+ books, 140 book chapters, 423 original and review papers, an
h
index of 78 and ~ 25,000 Goggle Scholar citations. Professor Pandey is the recipient of several fellowships such as the Fellowships of Royal Society of Biology (UK), Academician of European Academy of Sciences and Arts, Germany; ISEES; National Academy of Science (India); BRSI; and awards such as Thomson Scientific India Citation Laureate Award, USA; UNESCO Professor; Raman Research Fellowship Award, CSIR; and GBF, Germany. Prof Pandey is Editor-in-chief of
Bioresource Technology,
Honorary Executive Advisor of
Journal of Water Sustainability
and
Journal of Energy and Environmental Sustainability,
Subject editor of
Proceedings of National Academy of Sciences (India)
and serves on the editorial board of several other journals.

Dr. Akhilendra Pratap Singh:
Dr.

Akhilendra Pratap Singh is a CSIR Pool Scientist at Indian Institute of Technology Kanpur. He received his Masters and PhD in Mechanical Engineering from Indian Institute of Technology Kanpur, India in 2010 and 2016 respectively. His areas of research include advanced low temperature combustion; optical diagnostics with special reference to engine endoscopy and PIV; combustion diagnostics; engine emissions measurement; particulate characterization and their control; and alternative fuels. Dr. Singh has published 15 peer reviewed international journal papers and 6 peer reviewed international and national conference papers. He is a member of numerous professional societies, including SAE, ASME, and ISEES. He is a member of the editorial board of the ‘Journal of Energy, Environment and Sustainability’.

Zusammenfassung

This research monograph presents both fundamental science and applied innovations on several key and emerging technologies involving fossil and alternate fuel utilization in power and transport sectors

from renowned experts in the field. Some of the topics covered include: autoignition in laminar and turbulent nonpremixed flames; Langevin simulation of turbulent combustion; lean blowout (LBO) prediction through symbolic time series analysis; lasers and optical diagnostics for next generation IC engine development; exergy destruction study on small DI diesel engine; and gasoline direct injection. The book includes a chapter on carbon sequestration and optimization of enhanced oil and gas recovery.  The contents of this book will be useful to researchers and professionals working on all aspects on combustion.

Produktdetails

Mitarbeit Santanu De (Herausgeber), Akhilendra Pratap Singh (Herausgeber), Santan De (Herausgeber), Ashok Pandey et al (Herausgeber), Avinash Kumar Agarwal (Herausgeber), Avinash K. Agarwal (Herausgeber), Ashok Pandey (Herausgeber)
Verlag Springer, Berlin
 
Inhalt Buch
Produktform Fester Einband
Erscheinungsdatum 31.03.2017
Thema Naturwissenschaften, Medizin, Informatik, Technik > Technik > Elektronik, Elektrotechnik, Nachrichtentechnik
 
EAN 9789811037849
ISBN 978-981-10-3784-9
Anzahl Seiten 451
Illustration X, 451 p. 240 illus., 178 illus. in color.
Abmessung (Verpackung) 15.6 x 24.2 x 2.7 cm
Gewicht (Verpackung) 859 g
 
Serie Springer
Themen B, ENERGY, energy systems, Energy Grids and Networks, Thermodynamics, Engineering Thermodynamics, Heat and Mass Transfer, Machinery, Engineering thermodynamics, Heat engineering, Heat transfer, Mass transfer, Engines, Engine Technology, Engines & power transmission, Engines and power transmission
 

Kundenrezensionen

Zu diesem Artikel wurden noch keine Rezensionen verfasst. Schreibe die erste Bewertung und sei anderen Benutzern bei der Kaufentscheidung behilflich.

Schreibe eine Rezension

Top oder Flop? Schreibe deine eigene Rezension.

Für Mitteilungen an CeDe.ch kannst du das Kontaktformular benutzen.

Die mit * markierten Eingabefelder müssen zwingend ausgefüllt werden.

Mit dem Absenden dieses Formulars erklärst du dich mit unseren Datenschutzbestimmungen einverstanden.